Nanotech Antibacterial
Nanotech Antibacterial is an acrylic-based emulsion paint which contains a highly active nano silver anti-bacterial agent. Nanotech Antibacterial works by releasing silver ions at the surface of the paint film in a controlled manner, it is highly effective against Methicillin Resistant Staphylococcus Aureus, Klebsillia species, Aspergillus Niger and other gram positive, gram negative micro organisms. Nanotech Antibacterial can easily be cleaned and washed, it is resistant to common household detergents and disinfectants. Nanotech Antibacterial can be used safely in areas where a high level of hygienic properties is required and contributes to a cleaner, healthier environment. Its action is long lasting as the silver ions remain effective even after they have sterilised the micro-organisms.
Unit Sizes
5L, 20L
Description
Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Nanotech Antibacterial. For panel wood or ceiling boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.
Application Method
Apply three coats by roller or brush onto clean, dry and sealed surface. Nanotech Antibacterial can be applied by airless or low-pressure spray equipment. Dilution is not necessary. However if dilution is required for ease of application, thin down with water as required. One litre of Nanotech Antibacterial will cover between 9 and 12 m2 of surface in one coat; at this spreading rate the dry film thickness will vary between 40 and 35 microns on a completely smooth, non absorbent surface.
Additional information
Size | 5L, 20L |
---|
Reviews
There are no reviews yet.