free hit counters
How would like to contact us?


Mauvilisse is a range of water based decorative paints. Available in silk and mat finish, Mauvilisse is very convenient for wooden, concrete and metal surfaces such as furniture, doors, walls and trims. Suitable for both interior and exterior use, it is a hard wearing decorative and protective finish which dries to an attractive fully washable smooth finish.

Unit Sizes
1l, 5l, 20l

This product is currently out of stock and unavailable.



Surface Preparation
Ensure that all surfaces to be painted are sound, clean, dry and free from defective or poorly adhering material such as efflorescence, dirt, grease or wax. New cement based surfaces should be allowed to cure for at least 28 days.
Plaster & Concrete:
Remove all loose dust and ensure surface is completely dry. Prime entire area with SEALER PRIMER in order to obtain a uniform barrier coat against alkalinity.
Remove splinters and fill defects with a wood filler. Sand smooth with 150 grit paper. If grain lifting occurs after application of primer, sand smooth with 220 grit sanding paper before topcoat is applied. AQUAGRIP can be used as primer.
Enamels and Varnished Surfaces:
Remove any loose and flaking paint. Sand down slightly for proper adhesion of MAUVILISSE .
Degrease surface with an appropriate cleaner. Sand gently before applying AQUAGRIP.
Galvanised Steel:
Clean with GALVANISED IRON CLEANER. Rinse clean. Allow to dry thoroughly.
Remove all loose dust and ensure surface is completely dry.
Remove all dust and grease with an appropriate cleaner. Allow to dry before applying AQUAGRIP.

Not suitable in areas with direct water contact such as shower enclosures or where frequent or heavy condensation is likely to occur.

Application Method
Apply by brush, short nap or sponge roller. Can be applied by airless and conventional spray. Do not thin. Use as is.
Spreading rate / Film thickness: ± 10 m² per litre per coat for a dry film thickness of 35 microns.
Drying time:
Approximately 30 – 45 minutes to touch dry, can be over-coated after 4 – 6 hours depending on ambient conditions.

Additional information


1L, 5L, 20L


There are no reviews yet.

Be the first to review “Mauvilisse”

Your email address will not be published. Required fields are marked *

  • Sign up
Lost your password? Please enter your username or email address. You will receive a link to create a new password via email.