Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Nanotech Antibacterial. For panel wood or ceiling boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.
Apply three coats by roller or brush onto clean, dry and sealed surface. Nanotech Antibacterial can be applied by airless or low-pressure spray equipment. Dilution is not necessary. However if dilution is required for ease of application, thin down with water as required. One litre of Nanotech Antibacterial will cover between 9 and 12 m2 of surface in one coat; at this spreading rate the dry film thickness will vary between 40 and 35 microns on a completely smooth, non absorbent surface.