free hit counters
How would like to contact us?

Manhole

Showing all 4 results

Grid List

Duraco Manhole 1000mm

  • A manhole or an Inspection Chamber is a vertical access chamber from the ground surface to the sewer network or other underground utilities. Manholes are usually positioned at a junction, to allow cleaning, inspection, connections, and repairs.By definition, a manhole is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 800mm minimum inner diameter.Whereas, an inspection chamber is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 200mm minimum outer diameter and an inner diameter of less than 800mm.In general, manholes or inspection chambers should be provided in the following situations:1.At all changes of direction on drains. 2.At all changes of gradient on drains. 3.At all drain junctions where cleaning is not otherwise possible. 4.On a drain within 12m from a junction between that drain and another drain unless there is an inspection chamber situated at that junction. 5.At all changes in pipe diameter.

Duraco Manhole 1000mm

  • A manhole or an Inspection Chamber is a vertical access chamber from the ground surface to the sewer network or other underground utilities. Manholes are usually positioned at a junction, to allow cleaning, inspection, connections, and repairs.By definition, a manhole is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 800mm minimum inner diameter.Whereas, an inspection chamber is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 200mm minimum outer diameter and an inner diameter of less than 800mm.In general, manholes or inspection chambers should be provided in the following situations:1.At all changes of direction on drains.

    2.At all changes of gradient on drains.

    3.At all drain junctions where cleaning is not otherwise possible.

    4.On a drain within 12m from a junction between that drain and another drain unless there is an inspection chamber situated at that junction.

    5.At all changes in pipe diameter.

Duraco Manhole 475mm

  • A manhole or an Inspection Chamber is a vertical access chamber from the ground surface to the sewer network or other underground utilities. Manholes are usually positioned at a junction, to allow cleaning, inspection, connections, and repairs.By definition, a manhole is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 800mm minimum inner diameter.Whereas, an inspection chamber is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 200mm minimum outer diameter and an inner diameter of less than 800mm. In general, manholes or inspection chambers should be provided in the following situations: 1.At all changes of direction on drains. 2.At all changes of gradient on drains. 3.At all drain junctions where cleaning is not otherwise possible. 4.On a drain within 12m from a junction between that drain and another drain unless there is an inspection chamber situated at that junction. 5.At all changes in pipe diameter.

Duraco Manhole 475mm

  • A manhole or an Inspection Chamber is a vertical access chamber from the ground surface to the sewer network or other underground utilities. Manholes are usually positioned at a junction, to allow cleaning, inspection, connections, and repairs.By definition, a manhole is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 800mm minimum inner diameter.Whereas, an inspection chamber is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 200mm minimum outer diameter and an inner diameter of less than 800mm.

    In general, manholes or inspection chambers should be provided in the following situations:

    1.At all changes of direction on drains.

    2.At all changes of gradient on drains.

    3.At all drain junctions where cleaning is not otherwise possible.

    4.On a drain within 12m from a junction between that drain and another drain unless there is an inspection chamber situated at that junction.

    5.At all changes in pipe diameter.

Duraco Manhole 600mm

  • A manhole or an Inspection Chamber is a vertical access chamber from the ground surface to the sewer network or other underground utilities. Manholes are usually positioned at a junction, to allow cleaning, inspection, connections, and repairs.By definition, a manhole is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 800mm minimum inner diameter.Whereas, an inspection chamber is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 200mm minimum outer diameter and an inner diameter of less than 800mm. In general, manholes or inspection chambers should be provided in the following situations: 1.At all changes of direction on drains. 2.At all changes of gradient on drains. 3.At all drain junctions where cleaning is not otherwise possible. 4.On a drain within 12m from a junction between that drain and another drain unless there is an inspection chamber situated at that junction. 5.At all changes in pipe diameter.

Duraco Manhole 600mm

  • A manhole or an Inspection Chamber is a vertical access chamber from the ground surface to the sewer network or other underground utilities. Manholes are usually positioned at a junction, to allow cleaning, inspection, connections, and repairs.By definition, a manhole is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 800mm minimum inner diameter.Whereas, an inspection chamber is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 200mm minimum outer diameter and an inner diameter of less than 800mm.

    In general, manholes or inspection chambers should be provided in the following situations:

    1.At all changes of direction on drains.

    2.At all changes of gradient on drains.

    3.At all drain junctions where cleaning is not otherwise possible.

    4.On a drain within 12m from a junction between that drain and another drain unless there is an inspection chamber situated at that junction.

    5.At all changes in pipe diameter.

Duraco Manhole 800mm

  • A manhole or an Inspection Chamber is a vertical access chamber from the ground surface to the sewer network or other underground utilities. Manholes are usually positioned at a junction, to allow cleaning, inspection, connections, and repairs.By definition, a manhole is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 800mm minimum inner diameter.Whereas, an inspection chamber is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 200mm minimum outer diameter and an inner diameter of less than 800mm.In general, manholes or inspection chambers should be provided in the following situations: 1.At all changes of direction on drains. 2.At all changes of gradient on drains. 3.At all drain junctions where cleaning is not otherwise possible. 4.On a drain within 12m from a junction between that drain and another drain unless there is an inspection chamber situated at that junction. 5.At all changes in pipe diameter.

Duraco Manhole 800mm

  • A manhole or an Inspection Chamber is a vertical access chamber from the ground surface to the sewer network or other underground utilities. Manholes are usually positioned at a junction, to allow cleaning, inspection, connections, and repairs.By definition, a manhole is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 800mm minimum inner diameter.Whereas, an inspection chamber is a drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level with a riser shaft of 200mm minimum outer diameter and an inner diameter of less than 800mm.In general, manholes or inspection chambers should be provided in the following situations:

    1.At all changes of direction on drains.

    2.At all changes of gradient on drains.

    3.At all drain junctions where cleaning is not otherwise possible.

    4.On a drain within 12m from a junction between that drain and another drain unless there is an inspection chamber situated at that junction.

    5.At all changes in pipe diameter.

Showing all 4 results