Water tanks, pumps and plumbing products — Mauritius
Showing 1–20 of 77 results
Capacity: 250 Litres
Dimensions: L885mm x W590mm x H885mm
100% virgin UV-stabilised polyethylene
One-piece moulded drum with wheeled base
Wheeled base for effortless turning and mixing
Opaque design with side holes for airflow
Two-piece system: drum and wheeled base
Manufactured in Mauritius by Duraco
Capacity: 140L
Dimensions: D630mm x H600mm
Use: Domestic — 1 kitchen sink
Intercepts fats, oil, grease and solids (FOGS) from kitchen wastewater
Underground installation — below ground use only
150mm compacted rock sand bedding required
PVC sleeves supplied at inlet and outlet
Manufactured in Mauritius by Duraco
Capacity: 1800L
Dimensions: L2225mm x W825mm x H1200mm
Use: Commercial use
Intercepts fats, oil, grease and solids (FOGS) from kitchen wastewater
Underground installation — below ground use only
150mm compacted rock sand bedding required
PVC sleeves supplied at inlet and outlet
Manufactured in Mauritius by Duraco
Capacity: 200L
Dimensions: D630mm x H800mm
Use: Domestic — 2 kitchen sinks
Intercepts fats, oil, grease and solids (FOGS) from kitchen wastewater
Underground installation — below ground use only
150mm compacted rock sand bedding required
PVC sleeves supplied at inlet and outlet
Manufactured in Mauritius by Duraco
Capacity: 3000L
Dimensions: D1935mm x H1500mm
Use: Commercial use
Intercepts fats, oil, grease and solids (FOGS) from kitchen wastewater
Underground installation — below ground use only
150mm compacted rock sand bedding required
PVC sleeves supplied at inlet and outlet
Manufactured in Mauritius by Duraco
Capacity: 350L
Dimensions: D760mm x H800mm
Use: Domestic — 3 kitchen sinks
Intercepts fats, oil, grease and solids (FOGS) from kitchen wastewater
Underground installation — below ground use only
150mm compacted rock sand bedding required
PVC sleeves supplied at inlet and outlet
Manufactured in Mauritius by Duraco
Capacity: 4700L
Dimensions: L2300mm x W1800mm x H1800mm
Use: Commercial use
Intercepts fats, oil, grease and solids (FOGS) from kitchen wastewater
Underground installation — below ground use only
150mm compacted rock sand bedding required
PVC sleeves supplied at inlet and outlet
Manufactured in Mauritius by Duraco
Dimensions: 300×300mm
Load capacity: 1.5T — Class A15 (BS EN124)
Material: Glass Reinforced Fibre (GRP)
Rust-proof and UV resistant
Better performance than cast iron
Zero scrap value — burglar proof
Corrosion resistant
Can be engraved with personalised logo
ISO 9001:2008 certified
Manufactured in Mauritius by Duraco
Dimensions: 450×450mm
Load capacity: 1.5T — Class A15 (BS EN124)
Material: Glass Reinforced Fibre (GRP)
Rust-proof and UV resistant
Better performance than cast iron
Zero scrap value — burglar proof
Corrosion resistant
Can be engraved with personalised logo
ISO 9001:2008 certified
Manufactured in Mauritius by Duraco
Dimensions: 450×450mm
Load capacity: 12.5T — Class B125 (BS EN124)
Material: Glass Reinforced Fibre (GRP)
Rust-proof and UV resistant
Better performance than cast iron
Zero scrap value — burglar proof
Corrosion resistant
Can be engraved with personalised logo
ISO 9001:2008 certified
Manufactured in Mauritius by Duraco
Dimensions: 600×600mm
Load capacity: 12.5T — Class B125 (BS EN124)
Material: Glass Reinforced Fibre (GRP)
Rust-proof and UV resistant
Better performance than cast iron
Zero scrap value — burglar proof
Corrosion resistant
Can be engraved with personalised logo
ISO 9001:2008 certified
Manufactured in Mauritius by Duraco
Dimensions: 600×600mm
Load capacity: 40T — Class D400 (BS EN124)
Material: Glass Reinforced Fibre (GRP)
Rust-proof and UV resistant
Better performance than cast iron
Zero scrap value — burglar proof
Corrosion resistant
Can be engraved with personalised logo
ISO 9001:2008 certified
Manufactured in Mauritius by Duraco
Dimensions: 800×800mm
Load capacity: 12.5T — Class B125 (BS EN124)
Material: Glass Reinforced Fibre (GRP)
Rust-proof and UV resistant
Better performance than cast iron
Zero scrap value — burglar proof
Corrosion resistant
Can be engraved with personalised logo
ISO 9001:2008 certified
Manufactured in Mauritius by Duraco
Dimensions: 800×800mm
Load capacity: 40T — Class D400 (BS EN124)
Material: Glass Reinforced Fibre (GRP)
Rust-proof and UV resistant
Better performance than cast iron
Zero scrap value — burglar proof
Corrosion resistant
Can be engraved with personalised logo
ISO 9001:2008 certified
Manufactured in Mauritius by Duraco
Length: 381mm | Height: 410mm
Inlet dimension: 195mm
Outlet dimension: 110mm
Buried plumbing device — receives wastewater from bathroom and laundry
Water seal prevents sewer gases entering the building
Raised surround prevents stormwater and foreign matter entering sewer
Manufactured in Mauritius by Duraco
Model: B4108
Diameter: 475mm
Height range: 980–1070mm
Standard: EN13598/1
High-Density Polyethylene (HDPE)
One-piece moulded construction
Universal PVC pipe connection from 110mm
Rubber joining device — watertight
Lightweight — hand installation, no lifting gear required
Manufactured in Mauritius by Duraco
Model: B445
Diameter: 475mm
Height range: 350–440mm
Standard: EN13598/1
High-Density Polyethylene (HDPE)
One-piece moulded construction
Universal PVC pipe connection from 110mm
Rubber joining device — watertight
Lightweight — hand installation, no lifting gear required
Manufactured in Mauritius by Duraco
Model: B465
Diameter: 475mm
Height range: 560–650mm
Standard: EN13598/1
High-Density Polyethylene (HDPE)
One-piece moulded construction
Universal PVC pipe connection from 110mm
Rubber joining device — watertight
Lightweight — hand installation, no lifting gear required
Manufactured in Mauritius by Duraco
Model: B487
Diameter: 475mm
Height range: 770–860mm
Standard: EN13598/1
High-Density Polyethylene (HDPE)
One-piece moulded construction
Universal PVC pipe connection from 110mm
Rubber joining device — watertight
Lightweight — hand installation, no lifting gear required
Manufactured in Mauritius by Duraco
Model: B61111
Diameter: 600mm
Height range: 950–1150mm
Standard: EN13598/1
High-Density Polyethylene (HDPE)
One-piece moulded construction
Universal PVC pipe connection from 110mm
Rubber joining device — watertight
Lightweight — hand installation, no lifting gear required
Manufactured in Mauritius by Duraco
End of content
End of content
Be the first to hear about new stock, special offers, and DBM grant updates from QBM Hardware.
By subscribing, you agree to our Privacy Policy. No spam — unsubscribe anytime.
Still deciding? Our team can help you find exactly what you need and get it delivered to your door.
QBM Hardware
59, Royal Road, Phoenix
Mon–Sat 7:30am–5pm
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
Don't have an account yet? Sign up
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now
