100% Original
Best Price
Free Shipping*

Drymix Karofix C1E — Standard Cementitious Tile Adhesive

379

2 products sold in last 20 hours
Selling fast! 1 person has in their cart

Drymix Karofix C1E — Standard Tile Adhesive
Cementitious adhesive for ceramic and porcelain tiles
Interior and exterior walls and floors
Suitable for wet areas and swimming pools
Pack: 25 kg | Coverage: up to 6.9 m² per bag
Water: 8.25 L (floor) | 7.0 L (wall)
Light foot traffic after 24 hours | Full use in 14 days
Standard: EN 12004 | ISO 9001 — LGAI/APPLUS tested

10 in stock
20 people are viewing this right now
  • Check Mark Estimated Delivery : Up to 4 business days
  • Check Mark Free Delivery : On all orders over Rs3000
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
  • Apple Pay
Guaranteed Safe And Secure Checkout

Drymix — Karofix C1E — Standard Tile Adhesive

Drymix Karofix C1E is a standard cementitious tile adhesive for ceramic and porcelain tiles on interior and exterior walls and floors, including wet areas and swimming pools. Its thixotropic properties prevent slip and sag on vertical surfaces. Tested by LGAI/APPLUS notified laboratory, compliant with EN 12004, ISO 9001 certified.

Tile size suitability:
– Up to 1600 cm²: recommended single bedding for all surfaces, wet areas, pools and over existing tiles
– 1600–1800 cm²: single bedding + back buttering recommended
– Above 3600 cm²: not recommended

Substrate curing required before tiling:
– New concrete: minimum 6 weeks
– New screed: minimum 4 weeks
– New render: minimum 2 weeks

Coverage per 25 kg bag:
– Single buttering (10×10×10 notch, trowel at 60°): 6.9 m²
– Double buttering + back adhesion (2.5 mm): 4.3 m²
– Double buttering both sides with notched trowel: 3.9 m²

Product Data:
– Pack: 25 kg bag
– Water: 8.25 L per bag (floor) | 7.0 L per bag (wall)
– Mix density: 1,800 kg/m³
– Pot life: 2 hours maximum
– Open time: 20 min | Adjustability: < 45 min
– Light foot traffic: after 24 hours
– Full use (normal surface): 14 days
– Shelf life: 6 months

Technical Performance (EN 12004 / ISO 9001 — LGAI/APPLUS certified):
– Initial tensile adhesion: ≥ 0.5 N/mm²
– After heat ageing: ≥ 0.5 N/mm²
– After water immersion: ≥ 0.5 N/mm²
– After freeze/thaw cycles: ≥ 0.5 N/mm²
– Open time after 30 min: ≥ 0.5 N/mm²

Not suitable for: wood, metal, rubber or PVC surfaces; surfaces with strong movement or vibration; where fast-set adhesive is required.

Application:
Moisten surface with masonry brush. Add bag to water (floor: 8.25 L, wall: 7.0 L), mix smooth, rest 2–3 min. Apply with straight edge then comb with notched trowel. Press tile firmly within open time. Grout walls after 5–8 hours, floors after 24 hours. Minimum joint width 2–5 mm.

Precautions:
– Wear gloves and goggles during handling
– Avoid contact with eyes and skin
– In case of contact, rinse abundantly with clean water

Available at QBM Hardware, 59 Royal Road, Phoenix, Mauritius. Tel: +230 5255 1799